Ledlenser i4 Flashlight

Ledlenser i4 Flashlight

Ledlenser i4 Flashlight LED Lenser

Ledlenser i4 Flashlight

Product Code:

Select your options above to check stock status.
Product SKU:


The battery-operated Ledlenser i4 penlight is only slightly larger than a pen.

With three micro-cells, the Ledlenser i4 achieves a good lighting performance of up to 80 meters1 beam distance and a luminous flux of up to 120 lumen1. In the lowest setting, it lights for up to 20 hours1. Like all penlights in the Ledlenser i-series, the i4 is fitted with the patented Advanced Focus System which enables infinite and precise focusing of the light cone.

  • Lumens: 120 High | 10 Low
  • Beam distance: 80 m High | 20 m Low
  • Run Time: 4 h High | 20 h Low
  • Long operational time – Up to 20 hours1 in the lowest setting
  • Simple to operate – Quickly switch to the Power or Low Power mode, or switch off using the end cap switch
  • From the homogeneous circle of close range lighting (focused) to a sharply bundled long-distance beam (defocused) – the patented Advanced Focus System with reflector lens enables efficient, tailored lighting
  • Fast changing of the light cone with just one hand – Rapid Focus
  • Protected against spray water – IPX4
  • Robust metal housing for a long lamp lifetime
Technical Data:
  • Length defocused: 5.7" | 145mm
  • Length focused: 5.5" | 140mm
  • Head diameter: 0.59" | 15mm
  • Tube diameter: 0.59" | 15mm
  • Weight w/ batteries: 1.9 oz | 55 g
  • Weight w/o batteries: 1.1 oz | 32 g
  • Focus Function yes
  • Head Material: Aluminum alloy
  • Tube material: Aluminum alloy
  • Optic: Lens PMMA
  • Battery: AAA Alkaline

1. Measurement values according to ANSI FL1 in the respective setting. If no setting is explicitly indicated, the values refer to luminous flux (lumens/lm) and lighting range (meters/m) on the highest setting, and to battery duration (hours/hrs/h) on the lowest setting. A boost function (if available) can be used several times, but only for short periods of time. If the light is equipped with (a) colored LED(s), the measurement values are given for the white light or the white LED. If the light has different energy modes, the measurement is made based on the “energy saving mode”.

Special discounts may apply for high volume sales. Contact our Bids & Quotes department for more information.